エラー
スタイルが定義されていません。 エラー
!
エラー
3. Remove the HDD from the slot and disconnect it from the connector on the HDD
harness.
HDD harness
Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-6 and 4-7.
1. Connect the HDD to the connector on the HDD harness and lay the HDD down into
the slot.
2. Set the HDD cover and secure it with the following screw.
M2.54B
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
HDD
Figure 4-7 Removing the HDD
FLAT HEAD screw
スタイルが定義されていません。
!
Replacement Procedures
1
[CONFIDENTIAL]
エラー
ス
!
4-19