Toshiba Qosmio F60 Series Maintenance Manual page 342

エラー スタイルが定義されていません。 エラー
!
エラー
Installing the RTC battery
To install the RTC battery, follow the steps below and refer to Figure 4-24.
1. Stick the RTC battery insulator on the system board in place and set the RTC
battery on the RTC battery insulator.
CAUTION: Do not put the RTC battery harness on the RTC battery.
Do not stick the RTC battery insulator on the ICs of the system board.
Stick the RTC battery insulator as shown in the figure below.
2. Wrap the RTC battery with the RTC battery insulator.
3. Connect the RTC battery harness to the connector CN4632 on the system board.
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
RTC battery insulator
スタイルが定義されていません。
!
Replacement Procedures
[CONFIDENTIAL]
エラー ス
!
4-41