To Mark Track Numbers - Sony mhc-gzr99d Operating Instructions Manual

To mark track numbers
You can mark the track numbers during
recording of any source.
Press REC TO USB on the unit at the
point you want to add a track mark.
The system pauses recording for a few
seconds and adds track mark, showing
message "New Track. " No sound is
recorded during pause time.
Note
The track numbers are automatically marked
when you record more than 60 minutes.
Folder and file generation rules
When first recording the analog audio
to the USB device, a "MUSIC" folder
is created directly below the "ROOT"
folder.
Folders and files are generated within this
"MUSIC" folder as follows.
Music Folder name
source
Tape "TAPE001"*
Tuner "FM001"* or
"AM001"*
VIDEO/ "VIDEO001"*
SAT or "SAT001"*
AUDIO IN
L/R
* Folder and file numbers are assigned serially
thereafter.
Note
Recording stops automatically when:
File name
"TRACK001"*
"TRACK001"*
"TRACK001"*
 you change the function.
 you change the band.
 you turn off the system.
 the USB device runs out of space during
the recording.
 the number of files or folders on the USB
device reaches the limit for the number
that the system can recognize.
81
GB