Tape Deck; Optional Components - Sony mhc-gzr99d Operating Instructions Manual

 Locate the antennas as far away from
the speaker cords and the power cord
as possible, to avoid picking up noise.
 Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
 Press REPEAT/FM MODE repeatedly
until "MONO" disappears from the
display.
Tape deck (except for Latin American
models)
The tape does not record or
playback, or there is a decrease in
sound level.
 The tape heads are dirty (see "Cleaning
the tape heads" (page 129)).
There is excessive wow or flutter, or
the sound drops out.
 The capstans or pinch rollers are
dirty (see "Cleaning the tape heads"
(page 129)).
The tape does not record.
 No tape is loaded. Load a tape.
 The tab has been removed from
the tape. Cover the broken tab with
adhesive tape (page 129).
 The tape has reeled to the end.
Optional components
There is no sound.
 Refer to General item "There is no
sound. " (page 109) and check the
condition of the system.
 Connect the component properly
(page 106) while checking:
if the cords are connected properly.

if the cord plugs are firmly inserted

all the way.
 Turn on the connected component.
 Refer to the operating instructions
supplied with the connected
component and start playback.
To change the AM tuning interval
(Except for Saudi Arabian models)
The AM tuning interval is factory-preset
to 9 kHz or 10 kHz (for some areas).
1
Press FUNCTION +/ or TUNER/
BAND repeatedly to select "AM".
2
Press / to turn off the system.
3
Press DISPLAY repeatedly until "Sony
DEMO" appears in the display.
4
Press / on the unit while holding
down TUNING + on the unit.
"AM 9K STEP" or "AM 10K STEP"
appears in the display.
When you change the interval, all the
AM preset stations are erased.

Continued
11
GB