Specifications - Sony mhc-gzr99d Operating Instructions Manual

To prevent a tape from being
accidentally recorded over (except
for Latin American models)
Break off the cassette's overwrite protection tab
from side A or B as illustrated.
Break off
the cassette
tab
To later reuse the tape for recording, cover the
broken tab with adhesive tape.
About a tape longer than 90 minutes
(except for Latin American models)
The use of the tape with more than 90 minutes
of play time is not recommended except for
long, continuous recording or playback.
Cleaning the tape heads (except for
Latin American models)
Use dry- or wet-type cleaning cassette
(available separately) after every 10 hours of
use, before you start an important recording,
or after playing an old tape. Failure to clean the
tape heads can cause degraded sound quality or
an inability of the unit to record or play tapes.
For details, refer to the instructions of the
cleaning cassette.

Specifications

Main unit
Amplifier section
The following measured at AC 127 V, 60 Hz
(Mexican model)
The following measured at AC 127, 220,
240 V, 50/60 Hz (Saudi Arabian model)
The following measured at AC 120, 220,
240 V, 50/60 Hz (Other models)
MHC-GZR99D
Power output (rated):
135 W + 135 W (at 6 Ω, 1 kHz, 1%
THD, at LINK MODE)
RMS output power (reference)
Front speaker:
175 W + 175 W (per channel at 8 Ω,
1 kHz, 10% THD)
Satellite speaker:
70 W + 70 W (per channel at 24 Ω,
1 kHz, 10% THD)
Subwoofer:
210 W (at 6 Ω, 100 Hz, 10% THD)
MHC-GZR88D
Power output (rated):
125 W + 125 W (at 6 Ω, 1 kHz, 1%
THD, at LINK MODE)
RMS output power (reference)
Front speaker:
175 W + 175 W (per channel at 8 Ω,
1 kHz, 10% THD)
Satellite speaker:
70 W + 70 W (per channel at 24 Ω,
1 kHz, 10% THD)

Continued
19
GB