Sony mhc-gzr99d Operating Instructions Manual page 115

Transferring or recording is stopped
before it is finished.
 You are using an unsupported USB
device. See "Compatible devices
with this system" (page 134) for the
supported device types.
 The USB device is not formatted
correctly. Refer to the operating
instructions supplied with the USB
device for how to format.
 Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
transferring or recording again.
 If the transfer, recording and erase
operations are repeated multiple times,
the file structure within the USB device
becomes fragmented. Refer to the
operating instructions supplied with
the USB device for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
Transferring or recording results in
an error.
 You are using an unsupported USB
device. See "Compatible devices
with this system" (page 134) for the
supported device types.
 Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
transferring or recording again.
 The USB device was disconnected
or the power was turned off during
the transfer or recording process.
Delete the partially-transferred file or
partially-recorded file, and perform
transferring or recording again. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions supplied with
the USB device for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.

Continued
11
GB