When Using A Tv - Sony mhc-gzr99d Operating Instructions Manual

8
Press  or  repeatedly to select
"START, " then press ENTER.
The system outputs the progressive
signal for 5 seconds. Check that the
screen is displayed correctly.
9
Press  or  repeatedly to select
"YES. "
The system outputs the progressive
signal. When you select "NO, "
the system does not output the
progressive signal.
Note
There would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.

When using a TV

Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in yellow.
To Press
TV / while
Turn the TV on
or off holding down TV.
Switch the TV's TV INPUT while
input source holding down TV.
between the TV
and other input
sources
Select the TV TV CH +/ or
channels numeric buttons*
while holding down
TV.
Adjust the TV VOL +/ while
volume of the TV holding down TV.
speaker(s)
* For double digit number, hold down TV
and press -/-- , then press the number. (For
example, hold down TV, press -/-- , then 2
and 5 for entering 25.)

GB