Recording Analog Audio To A Usb Device - Sony mhc-gzr99d Operating Instructions Manual

Recording analog
audio to a USB device
You can record the sound from analog
audio sources. The sound is recorded as
128 kbps MP3 file.
The TAPE function is not available for
Latin American models.
1
Connect the USB device to the
(USB) port.
2
Press FUNCTION +/ repeatedly
to select the desired source.
 TAPE A/B (except for Latin
American models): To record from
this system's tape deck.
 TUNER FM/AM: To record from
this system's tuner.
 VIDEO/SAT: To record from the
optional component connected to
the VIDEO SAT AUDIO IN L/R
jacks.
If the playback direction of the tape is
1)
set to "CYCLE, " the system will record
both sides of the tape five times. If you
want to stop at one recording, be sure
to set the playback direction of the
tape to "RELAY" or "1WAY. "
Recording continues even though tape
2)
playback has ended.
Recording stops after playing deck A
3)
even when the playback direction of
the tape is set to "RELAY. "
80
GB
3
4
To stop recording
Press .
To remove the USB device
1
2
1)2)3)
3
Press REC TO USB on the unit.
"Please Wait" appears and the display
cycles between "Free xx.x GB" (free
space on the USB device) and "Push
Enter. "
The USB device stands by for
recording.
Start playing the desired source
to record, then press ENTER.
Press  to stop recording.
Press  to turn off the system.
Remove the USB device.