Tuner; Listening To The Radio - Sony mhc-gzr99d Operating Instructions Manual

Tuner

Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
1
Press FUNCTION +/ (or press
TUNER/BAND on the unit)
repeatedly to select "FM" or "AM. "
2
Perform tuning.
For automatic scanning (MHC-
GZR99D/GZR88D only):
Press and hold TUNING +/ until
the frequency indication changes and
then release.
"AUTO" appears in the display.
Scanning stops automatically when
a station is tuned in and "TUNED"
appears in the display. When a
FM stereo program is tuned in,
"STEREO" appears in the display.
If "TUNED" does not appear and the
scanning does not stop, press  and
perform manual tuning.
For automatic scanning (MHC-
GZR77D only):
Press and hold TUNING +/ until
the frequency indication changes and
then release.
"AUTO" appears in the display.
Scanning stops automatically when
a station is tuned in and "TUNED"
lights up in the display. When a FM
stereo program is tuned in, "ST"
lights up in the display.
If "TUNED" does not appear and the
scanning does not stop, press  and
perform manual tuning.
For manual tuning:
Press TUNING +/ repeatedly.
For direct tuning:
Press D.TUNING, then use the
numeric buttons to enter the
frequency of the desired station. For
example, press 1, 0, 2, 5 and 0 to enter
the frequency of FM 102.50 MHz,
then press ENTER. If you cannot
tune in the station, make sure you
have entered the right frequency. If
you still cannot tune in the station,
the frequency is not used in your
area. To cancel direct tuning, press
D.TUNING.
Continued

7
GB