Fuji Xerox DocuPrint M218 fw User Manual page 336

NOTE:
• This item is displayed only when the printer is connected with a wireless network.
• WPS
Purpose:
To configure wireless networks in accordance with the WPS standards.
Values:
Push Button
Control
PIN Code
NOTE:
• Instead of selecting Push Button Control, you can also start WPS-PBC by pressing and holding the
(WPS) button.
• WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK,
WPA-PSK-AES, WPA2-PSK-AES, WPA-PSK-TKIP, Open (No Security)
• This item is displayed when the Ethernet cable is disconnected and Wi-Fi is set to On.
• Reset Wireless
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all
wireless network settings are reset to their factory default values.
Values:
No*
Yes
NOTE:
• This item is displayed only when the printer is connected with a wireless network.
335 Using the Operator Panel Menus and Keypad
PBC Start No* Disables the security method of WPS-PBC.
Yes Configures the wireless setting with the security method of
WPS-PBC.
Start Configures the wireless setting using the PIN code assigned
Configuration automatically by the printer.
Print PIN Code Prints the PIN code. Confirm it when you enter the PIN code to
your computer.
Does not reset the wireless setting.
Resets the wireless setting.