Electrical Connection - Miele PW 5064 Operating Instructions Manual

Installation

Electrical connection

,
Ensure that the connection data
on the data plate (fusing, voltage
and frequency) match the main
electrical supply. If in doubt contact
an electrician.
,
This installation should be
performed by an experienced and
qualified technician, in accordance
with local codes and regulations.
,
Do not install devices that
automatically turn the washer off
(e.g. a clock timer), as the appliance
must be connected to the power
supply network so that the drum
door can be opened.
52
The washer comes with a power cord
and NEMA 6-30 plug.
The machine is supplied as standard
for connection to a 208/240 V, 60 Hz,
30 A, 2-phase electrical supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
The machine must only be connected
to the voltage and frequency shown on
the data plate.