Miele PW 5064 Operating Instructions Manual page 30

Detergent
The relays are turned as shown in
the overview. The containers must
be filled with the respective
detergent and additional agents in
the specified sequence.
Do not use any detergents and
additional agents that contain
chlorine or acid.
The dispensing pumps are not
turned on in the programs Cottons
universal, Cottons hygiene, Minimum
iron, Curtains, Quick wash and
Separate rinse.
30
Empty sensor
When the external liquid detergent
containers are empty, the washer
displays a message when the Empty
sensor is activated (see menu
Settings/Supervisor level).
When a container is empty, the
following appears prior to program start
or while the program is running:
Fill the dispensing
i
container
OK
If a program has started it will continue
until completed.
^ Press the OK button to delete the
displayed message, and refill the
containers.
With Disinfection programs, the
following appears:
Fault
i
Container empty
OK
The program is interrupted.
^ Press the OK button to delete the
displayed message, and refill the
containers.
^ Then re-start the program.
,
When the dispensing container
is empty during disinfection
programs you can presume that no
disinfection has taken place.
Re-start the program.