Leveling The Washer - Miele PW 5064 Operating Instructions Manual

Installation

Leveling the washer

To ensure smooth operation the washer
must be level.
Failure to level the machine can result
in increased water and energy
consumption as well as the washer
"banging" during the spin cycle or
"walking" across the floor during use.
Adjust and secure the feet
Level the washer by adjusting the four
feet. The machine is delivered with the
feet completely screwed in.
^ Turn the locking nut 2 clockwise with
the enclosed wrench. Unscrew each
of the four feet as much as necessary
by turning both the foot 1 and the
locking nut 2.
48
^ Make sure that the machine is level.
^ Once level, use pliers to hold the foot
1 in position. Tighten the locking nut
2 against the machine with the
wrench.
,
All four locking nuts must be
tight against the bottom of the
machine. Even if some feet were not
screwed out for leveling, they still
need to be checked for tightness.
Otherwise, the washer may wander.
Preventing the washer from slipping
^ Secure the front feet of the washer
with the provided retaining clips.
^ Follow the enclosed installation
instructions closely.