Changing The Program Sequence; Canceling A Program; Interrupting A Program; Changing A Program - Miele PW 5064 Operating Instructions Manual

Changing the program sequence

Canceling a program

A wash program can be canceled any
time after a program has started.
^ Turn the program selector to Stop.
The washer drains and the program is
canceled.
^ Press the Door button.
^ Remove the laundry
or
^ close the door and start a new
program.
The washer locks immediately after
starting a mop or cloth disinfection
program. It is no longer possible to
cancel or change the program or to
open the door.

Interrupting a program

^ Turn off the washer with the K
button.
To continue:
^ Turn the washer on again with the K
button.
^ Confirm the displayed message and
press the Start button.
26

Changing a program

To change a wash program
The program cannot be changed after
a program has started.
To select a different program, the
program that has started must be
canceled.
To change the temperature
Some programs allow you to change
the temperature up to 5 minutes after a
program has started.
^ Press OK, the temperature is
highlighted. To change the
temperature press – or +. Confirm
with OK.
To change the spin speed:
^ Press OK until the spin speed is
highlighted. Adjust the spin speed
with the – and + buttons. The spin
speed can be changed right up to
the start of the final spin.
Additional Pre-wash
Selection or de-selection of an
Additional Pre-wash is not possible
after the program has started.