Changing The Program Sequence; Changing A Program; Altering The Wash Program; Canceling A Program - Miele PWM 912 Operating And Installation Instructions

Changing the program sequence

Altering the wash
program
50

Changing a program

Before selecting a new program, cancel the current program and se-
lect a new one.

Canceling a program

You can cancel a wash program at any time after it has started.
Touch the Start/Stop sensor button.

The following will appear in the display:
 Cancel the program?
yes
Select .

The following will appear in the display:
Program cancelled .
The suds are pumped away.
Wait until the door unlocks.

Pull open the door.

Remove the laundry.


Switching on the washing machine after a power failure

If the washing machine is switched off with the  button during a
wash program, the program will be interrupted.
Switch the washing machine back on with the  button.

Note the message in the display.

Touch the Start/Stop sensor button.

The program will also be interrupted if power is interrupted by a
power outage.
When power is restored, confirm the message in the display with

OK.
Touch the Start/Stop sensor button.

The program continues.