Antenna Configuration - TechniSat Digit ISIO S2 Quick Start Manual

> Use the right/left arrow keys to select whether you have connected 1 or 2
antenna signals.
> Confirm with the OK key to accept the selection.

Antenna configuration

In this step of the installation you can adapt your digital receiver setup to the configuration of
your antenna.
> If you want to accept the default antenna setting, press the OK button.
> If the configuration of your reception equipment does not conform to the default
setting, press the Options key.
> Then create the antenna settings as described in more detail in section 7.6 according
to your reception equipment and press the Back button to go back to the antenna
configuration overview.
> Then confirm with the OK button to accept the settings.
13