TechniSat Digit ISIO S2 Quick Start Manual page 42

Fault
PC will not connect to
device; device will not
connect to network
DVR recording no longer
possible
Cannot delete DVR
recordings
DVR recordings are not
displayed
A second encrypted channel
will not play.
Possible cause
Wrong network settings
Network cable incorrectly
connected
Selected storage medium is
full
File system on storage
medium is damaged
Selected storage medium is
not attached.
The two selected channels
are not on the same
transponder
The CI dual decryption is not
switched on
The CI-/CI+ module used is
not Dual Decrypt compatible
42
Solution
Check network settings
(see section 7.5)
Check network connection
Delete existing recording(s)
Attach and use another
storage medium.
(see section 10.4.1)
Check storage medium
(section 10.4.2)
Connect configured storage
medium
(see section 10.4.1)
Modify setting for storage
medium
(see section 10.4.1)
Select two channels that are
on the same transponder.
(see sections 8.4 and 8.4.10)
Switch on CI dual decryption
(see section 19.1)
Use a "Dual Decrypt"
compatible module