Disposal Advice - TechniSat Digit ISIO S2 Quick Start Manual

3.4 Important information on data security
Before handing your receiver over to your dealer for maintenance purposes, we recommend
that you remove all storage media and data carriers.
Restoring data is not part of maintenance or repair work. TechniSat accepts no responsibility
for the loss of, or damage to, data during repair work.
3.5 Remote control/Changing the battery
> Open the cover on the battery compartment at the rear of the remote control by
pressing gently on the point indicated and pressing in the direction of the arrow.
> Insert the supplied batteries, ensuring that the poles are the right way around (indicator
visible in battery compartment).
> Close the battery compartment again.

3.6 Disposal advice

The packaging material used for your receiver consists entirely of recyclable materials.
Please sort the components appropriately, and dispose of them in line with your local waste
disposal regulations.
At the end of its useful life, this receiver may not be disposed of with your regular household
waste. It must be taken to a recycling collection point for electrical and electronic equipment.
This is indicated by the
The materials used can be re-used in accordance with their labelling.
By ensuring that valuable raw materials in old equipment are re-used, you can make a
valuable contribution towards protecting our environment.
Please contact your local authority for the location of the nearest recycling point.
Please ensure that dead batteries from the remote control and electronic waste items are
not included with your regular household refuse, but are correctly disposed of (either in
special bins for problem waste, or at collection points at specialist dealers).
symbol on the product, the operating manual or the packaging.
7