Roll Brush Head; Clean Dirt Hopper; Remove Brushes; Clean Brushes - HAKO HAKOMATIC B 90 CL Instruction Manual

Maintenance and Care
5.8

Roll brush head

1 Brush toothing
2 Dirt hopper
3 Roll brush head
4 Deflector rollers
5 Quick-release
6 Feed inlet
7 Brush seating
8 Locking lever
2
Fig.11
36

5.8.1 Clean dirt hopper

Clean dirt hopper (Fig. 11/2) at daily in-
tervals or as required.
Remove dirt hopper from the right ma-
chine side (seen in direction of travel).
Use quick-release (Fig. 11/5) to loosen
feed inlet (Fig. 11/6) and clean dirt hop-
per.
1
5 6
3 4

5.8.2 Remove brushes

1. Release brush seating (Fig. 11/7) by
locking lever (Fig. 11/8).
2. Remove brush seating by lowering
and removing it to the front.
3. Remove and check the brushes.

5.8.3 Clean brushes

Clean brushes in the brush head at
daily intervals or as required.

5.8.4 Fit brushes

Check brushes in the brush head for
wearing at weekly intervals and replace
as required.
1. Insert brush into brush head and let
it catch (brush toothing (Fig. 11/1) )
as to point to the outside).
2. Place brush seating and lock by le-
ver.

5.8.5 Change deflector roller

Check deflector rollers (Fig. 11/4) at
weekly intervals and replace if required.
8
7