Maintenance and Care
5.8
Roll brush head
1 Pedal für brush head lift-out
2 Dirt hopper
3 Roll brush head
4 Deflector rollers
5 Quick-release
6 Feed inlet
7 Brush seating
8 Locking lever
1
2
Fig.11
5.8.1
Clean dirt hopper
Clean dirt hopper (Fig. 11/2) at daily in-
tervals or as required.
Remove dirt hopper from the right ma-
chine side (seen in direction of travel).
Use quick-release (Fig. 11/5) to loosen
feed inlet (Fig. 11/6) and clean dirt hop-
per.
A
3
4
5
6
5.8.2
1. Lift-out cylindrical broom head (Fig.
11/3) by pedal (Fig. 11/1).
2. Release brush seating (Fig. 11/7) by
locking lever (Fig. 11/8).
3. Remove brush seating by lowering
and removing it to the front.
4. Remove and check the brushes.
5.8.3
Clean brushes in the brush head at dai-
ly intervals or as required.
5.8.4
Check brushes in the brush head for
wearing at weekly intervals and replace
as required.
1. Insert brush into brush head and let
it catch (toothing A has to point to the
outside).
2. Place brush seating and lock by le-
ver.
5.8.5
Check deflector rollers (Fig. 11/4) at
weekly intervals and replace if required.
7
8
Remove brushes
Clean brushes
Fit brushes
Change deflector roller
35