Specifications - Yamaha TF5 Quick Manual

10. Specifications

Sampling Frequency Internal Clock
Signal Delays Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Frequency Response +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Total Harmonic
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω, INPUT to OMNI OUT, Input Gain=Min.
Distortion*2
–128 dBu typ., Equivalent Input Noise, Input Gain=Max.,
Hum & Noise*3
–85 dBu, Residual output noise, ST master off
110 dB typ., DA Converter,
Dynamic Range
107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Crosstalk@1 kHz –100 dB*1, adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Dimensions (W x H TF5: 866 mm × 225 mm × 599 mm, 20.0 kg
x D) TF3: 716mm × 225 mm × 599 mm, 17.0kg
Net Weight TF1: 510mm × 225 mm × 599 mm, 13.5kg
Power Requirements
TF5: 120W, TF3: 110W, TF1: 100W
(wattage)
Power Requirements
100–240 V 50/60 Hz
(voltage and hertz)
Operating temperature range: 0–40 °C
Temperature Range
Storage temperature range: -20–60 °C
Included Accessories Quick Guide, Power Cord
*1. Crosstalk is measured with a –30 dB/octave filter@22 kHz.
*2. Total Harmonic Distortion is measured with a –18 dB/octave filter@80 kHz.
*3. Hum & Noise are measured with an A-Weight filter.
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.
Source code distribution
For three years after the final factory shipment, you may request from Yamaha the source code for any portions of the product which are licensed under the GNU General Public
License/GNU Lesser General Public License/RealNetworks Public Source License by writing to the following address:
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
Pro Audio Department, Yamaha Corporation
The source code will be provided at no charge; however, we may require you to reimburse Yamaha for the cost of delivering the source code to you. The source code can be
downloaded by visiting the following URL:
http://www.yamahaproaudio.com/
• Note that we shall bear no responsibility whatsoever for any damage arising from changes (additions/deletions) made to the software for this product by a third party other than
Yamaha (or party authorized by Yamaha).
• Note that re-use of source code released to the public domain by Yamaha is not guaranteed. Yamaha shall not bear any responsibility whatsoever for the source code.
24
TF series Quick Guide
48kHz