Workflow Overview - Yamaha TF5 Quick Manual

3. Workflow Overview

Here's a brief overview of how to start mixing using a Presets.
1
Connect
Connect the instruments and mics.
Connect output devices such as powered speakers.
Power switch
AC IN connector
Connect the included
power cord.
When your connections are finished, turn on the power.
NOTICE
• This product regularly saves the state of its
workspace so that it can return to the previous
state when the product is turned on. To ensure
that the state is saved properly, wait at least
10 seconds after performing the last operation
before turning the product off.
• After turning the unit off, wait for at least 6
seconds before turning it on again. Rapidly
turning the unit off and on in succession can
cause it to malfunction.
8
TF series Quick Guide
2
Use Presets to Set Up Each Channel
Step1
Press the [SEL] key to select a channel.
[SEL] key Display section
Library key ( )
NOTE
You can set up channels without using Presets. For details about the available features and parameters, refer to the Reference
Manual.
Step2
Press the Library key ( ) to access the
Library and recall a Preset.
Step3
Adjust the channel's parameters.
Adjust the input gain, EQ, compressor, and gate.
These can be adjusted from the OVERVIEW screen
or the individual configuration screens (page 18).
Input gain adjustment
(INPUT screen)
> Repeat steps 1 to 3 and set up each
channel.