Appendix; General Specifications - Yamaha MG Series Owner's Manual

Appendix

General Specifications

0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
Input channels
Output channels
Bus
Input Channel
Function
Level Meter
Built-in Effect
(XU models and
X models)
USB Audio
(XU Models)
Phantom Power Voltage
Power Requirements
Power Consumption
Dimensions (W × H × D)
Net Weight
Included Accessory
Optional Accessory
Operating Temperature
For other specifications, see the included "Technical Specifications."
The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha web-
site then download the manual file.
European Models
Inrush Current based on EN 55103-1:2009
3.0 A (on initial switch-on)
2.0 A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
32
MG20XU/MG20/MG16XU/MG16X/MG16/MG12XU/MG12X/MG12 Owner's Manual
MG12XU
MG12X
MG12
Mono: MIC/LINE 4
Mono/Stereo: MIC/LINE 2
Stereo: LINE 2
STEREO OUT 2
MONITOR OUT 1
PHONES 1
AUX SEND 2
GROUP OUT 2
STEREO 1
GROUP 2
AUX 2
(MG12XU/MG12X: incl. FX)
PAD 26 dB
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP 1 knob compressor (Gain/Threshold/Ratio)
Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB
Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
MID:
Gain: +15 dB/-15 dB
Frequency: 2.5 kHz
LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping level
Pre Monitor LEVEL 2 × 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]
SPX Algorithm 24 programs, PARAMETER control: 1, FOOT SW: 1 (FX RTN CH on/off)
2 IN / 2 OUT USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
+48 V
AC 100 – 240 V, 50 / 60 Hz
22 W
308 mm × 118 mm × 422 mm
(12.1" × 4.6" × 16.6")
MG12XU, MG12X:
MG12: 4.0 kg (8.8 lbs)
Owner's Manual, Technical Specifications, Cubase AI Download Information (XU models)
Rack-Mount Kit (MG20XU, MG20, MG16XU, MG16X, MG16), AC Power Cord
Rack-Mount Kit: RK-MG12 (MG12XU, MG12X, MG12),
Foot Switch: FC5 (XU models and X models)
0 to + 40°C
MG16XU
MG16X
MG16
8
2
2
4
4
1
4
4
(MG16XU/MG16X: incl. FX)
MID:
Gain: +15 dB/-15 dB
Frequency: Mono 250 Hz – 5 kHz peaking
peaking
30 W
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
MG16XU, MG16X:
4.2 kg (9.3 lbs) 6.8 kg (15.0 lbs)
MG16: 6.6 kg (14.6 lbs)
MG20XU
MG20
12
4
0
4
4
1
4
4
(MG20XU: incl. FX)
Stereo 2.5 kHz peaking
36 W
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
MG20XU: 7.1 kg (15.7 lbs)
MG20: 6.9 kg (15.2 lbs)