Yamaha TF5 Quick Manual page 16

Controls and functions
Operating the display
• Changing screens
The screen switches when you touch an on-screen
button.
You can touch an area of the screen to select
that area, then touch it again to switch to the
configuration screen for that area. If an area is
displayed in pink when selected, the area contains
a parameter that can be controlled with the [TOUCH
AND TURN] knob.
To return to the OVERVIEW screen, press the Home
key ( ).
• Scrolling
In the OVERVIEW screen, you can slide the screen
left and right to view different channels.
When a scroll bar is displayed, you can slide the
screen up and down to view more content. To scroll
quickly, simply use a swiping gesture.
16
TF series Quick Guide
• Adjusting the Q (steepness) of the EQ
When in manual mode on the EQ screen, select one
of the handles and pinch in or out to adjust the Q.
NOTE
This functionality is not available when multiple parameters can
be controlled by one knob (i.e., 1-knob mode). Use the button at
the top of the screen to switch to manual mode.
Using the [TOUCH AND TURN] knob to control
parameters
As shown below, touch the parameter you want to
control ( 1 ) and then turn the [TOUCH AND TURN]
knob as desired ( 2 ). A pink selection area is
displayed around the selected parameter.
In the OVERVIEW screen, touch an area of the screen
to adjust the parameter in that area. In this case, a
pink selection area is displayed around the selected
area.
[TOUCH AND TURN] knob
HINT
What is "1-knob" mode?
1-knob mode allows you to control multiple EQ or compressor
parameters by simply turning the [TOUCH AND TURN] knob.
When 1-knob mode is enabled, parameters cannot be adjusted
individually. You can turn 1-knob mode on and off from the EQ
and compressor screens.