Installing An Ny Card - Yamaha TF5 Quick Manual

Setup

8-4 Installing an NY card

Before installing an NY card in the expansion slot, confirm
that the card is compatible with TF-series consoles.
For information about compatible cards, visit the Yamaha
pro audio website.
http://www.yamahaproaudio.com/
1
Confirm that the console is turned off.
CAUTION
Inserting or removing a card while the unit is turned
on may cause electrical shock and damage to the
device.
2
Remove the screws that secure the slot cover, and
then remove the cover.
The screws will be used to secure the NY card. The slot cover
will not be used while the card is installed; store it in a safe
place for later use.
22
TF series Quick Guide
3
Align the sides of the NY card with the guide rails
inside the expansion slot, and then insert the NY
card.
Make sure you insert the card fully, so that the connection
terminal on the NY card is firmly connected to the connection
terminal inside the slot.
Make sure the sides of the NY card with the guide rails of the
device you are installing it in.
4
Use the screws you removed in step 2 to secure the
NY card.
Do not use the console without using the screws to secure the
NY card.
Slot cover
Using the console without securing the card may cause
damage to the product and malfunctions.
NOTE
When connecting a Tio1608-D, refer to the Tio1608-D Owner's
Manual.
Removing the NY card
1
Confirm that the console is turned off.
Inserting or removing a card while the unit is turned
on may cause electrical shock and damage to the
device.
2
Remove the screws that secure the NY card.
3
4
5
CAUTION
Insert a flat-head screwdriver or similar tool into the
notch at the bottom of the NY card, and pull out the
card slightly.
Notch
Hold the NY card by its panel, and slowly pull the
card out of the console.
Attach the slot cover (removed when you installed
the card) and use the screws to secure it.
Do not use the console without attaching the slot cover.
Using the console without attaching the slot cover may cause
damage to the product and malfunctions.