Appendix; General Specifications - Yamaha AG03MK2 User Manual

Appendix > General specifications

Appendix

General specifications

AG06MK2
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
Frequency response
(
Input (MIC) → MONITOR OUT via USB IN/OUT
(
+0.5 dB/−1.5 dB (20 Hz to 48 kHz @ Fs = 192 kHz) with a nominal output level reference @ 1 kHz, GAIN
knob: min, STREAMING OUT: DRY CH 1-2
Total harmonic distortion *1 (THD+N)
(
Input to MONITOR OUT
(
0.05 % @ 0 dBu (20 Hz to 20 kHz), GAIN knob: min
0.01 % @ +4 dBu (1 kHz), GAIN knob: min
Hum and noise *2 (20 Hz to 20 kHz)
(
Equivalent input noise
(
−128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
Residual output noise
(
−103 dBu (MONITOR OUT, MONITOR knob: min)
Crosstalk (1 kHz) *3
(
−80 dB
Input channels
(
Mono (MIC/LINE): 2, including HEADSET MIC (plug-in power;
CH 1 MIC and HEADSET MIC cannot be used simultaneously),
Stereo (LINE): 2, USB IN: 1, AUX INPUT: 1
Output channels
(
STEREO OUT: 1, MONITOR OUT: 1, PHONES: 2 (including HEADSET PHONES;
PHONES and HEADSET PHONES cannot be used simultaneously), AUX OUT: 1
Input channel function (CH 1, CH 2)
(
PAD
(
26 dB
DSP
(
CH1: COMP/EQ, REVERB, MUTE
CH2: COMP/EQ *4, AMP SIM, REVERB, MUTE
PEAK LED
(
LED turns on when the signal reaches 3 dB below clipping level.
Level meter
(
USB OUTPUT level
(
2 x 2 point LED meter [PEAK, SIG]
67