Table of Contents
Advertisement
Note: Motors from other manufacturers may work with the
Extra 330S EP ARF. However, the included fi rewall pieces
are designed to work specifi cally with the Great Planes
motors listed.
If using the Ammo brushless in-runner motor with 4.5:1 gearbox
or the RimFire brushless out-runner motor, we recommend a
10" x 7" E Slo-Flyer electric propeller (GPMQ4123).
ESC (electronic speed control)
A brushless ESC (electronic speed control) is required for
this plane. We recommend using the Great Planes Silver
Series 35A Brushless ESC 5V/2A BEC (GPMM1830).
Battery Pack
The Extra 330S EP ARF has been tested with 11.1V LiPo
packs ranging from 1250mAh to 2100mAh. Order numbers
are provided for packs of this size. The lighter 1250mAh pack
is suggested for maximum performance.
❏
Great Planes LiPo 1250mAh 11.1V 20C Discharge
w/Balance (GPMP0609)
❏
Great Planes LiPo 1500mAh 11.1V 20C Discharge
w/Balance (GPMP0613)
❏
Great Planes LiPo 2100mAh 11.1V 15C w/Balance
BP2100 (GPMP0721)
Note: Do not use Great Planes LiPo 1500mAh 11.1V
3S 8C Discharge (GPMP0831). This battery pack is not
capable of supporting the current draw of the recommended
power systems.
Also, if using a 1250mAh battery pack combined with the
brushless out-runner motor, avoid prolonged full throttle
fl ying since the current draw of the motor exceeds the
continuous maximum current draw rating of the battery pack.
The 1250mAh battery pack is capable of supporting shorter,
full throttle maneuvers.
Note: A cell balancer is required for the LiPo battery packs
listed above.
❏
Great Planes ElectriFly
(GPMM3160)
A suitable charger is also required. The Great Planes
™
PolyCharge4
is designed for LiPo packs only, but is able
to charge four LiPo packs simultaneously. The Great Planes
Propeller
Charger
™
Equinox LiPo 1 to 5 Cell Balancer
™
Triton2
charger will only charge one pack at a time, but
is capable of charging NiCd, NiMH, LiPo, and lead acid
batteries. Order numbers for both are provided as follows:
❏
Great Planes PolyCharge4 DC Only 4 Output LiPo
Charger (GPMM3015)
or
❏
Great Planes ElectriFly Triton2 DC Comp Peak
Charger (GPMM3153)
Required Adhesive & Building Supplies
This is the list of adhesive and building supplies required to
fi nish the Extra 330S EP ARF. Order numbers are provided
in parentheses.
❏
1/2 oz. [15g] Thin Pro
❏
1/2 oz. [15g] Medium Pro CA+ (GPMR6007)
❏
Pro 30-minute epoxy (GPMR6047)
❏
Denatured alcohol
❏
Drill bits: 1/8" [3mm]
❏
#1 Hobby knife (HCAR0105)
❏
#11 blades (5-pack, HCAR0211)
❏
Hobbico Steel T-pins 1" (100) (HCAR5100)
❏
Great Planes Pro Threadlocker (GPMR6060)
❏
CA applicator tips (HCAR3780)
❏
Small spring clamps
❏
220-grit Sandpaper
Optional Supplies & Tools
Here is a list of optional tools mentioned in the manual that
will help you build the Extra 330S EP ARF.
❏
21st Century
®
sealing iron (COVR2700)
❏
21st Century iron cover (COVR2702)
❏
2 oz. [57g] Spray CA activator (GPMR6035)
❏
4 oz. [113g] Aerosol CA activator (GPMR6034)
❏
CA debonder (GPMR6039)
❏
Epoxy brushes (6, GPMR8060)
❏
Mixing sticks (50, GPMR8055)
❏
Mixing cups (GPMR8056)
❏
™
Hobbico Duster
can of compressed air (HCAR5500)
❏
Panel Line pen (TOPQ2510)
❏
Rotary tool such as Dremel
❏
Hobbico fl exible 18" ruler stainless steel (HCAR0460)
4
™
CA (GPMR6001)
®
Advertisement
Table of Contents
