IDEAL Project Heat 15 Installation And Servicing page 17

12 UNpaCKINg....CONT'D
Note. This flue system incorporates a removable flue outlet nose that utilises a push fit location system. This enables the
installation of deflector, high level or balcony outlet flue kits without the removal of the whole 'B' pack terminal. The appliance
must not be operated without the desired outlet nose correctly fitted in place.
Note. Location dimples must be aligned with terminal mounting frame.
Pack B Contents Rear Flue Outlet Kit (55/80)
A Plastic Connector
B Flue Terminal
C Rubber terminal wall seal
D 2 x Self Tapping Screws
E Sealing Tape
F Cutting Aid
Pack B Contents Non-Telescopic (60/100)
A Flue terminal
B Flue turret
C Wall Seal (white)
D Wall Seal (black
E Cutting Aid
Pack B Contents Telescopic (60/100)
A Telescopic flue terminal
B Flue turret
C Wall seal (black)
D Screw
E Sealing Tape
F Wall Seal (White)
13 FRONT paNEL REMOVaL
1. Loosen the 2 screws retaining the front panel.
2. Pull the two spring clips downwards to disengage.
3. Pull the front panel forward and upwards to remove.
Project Heat -
Installation and Servicing
INSTALLATION
D
A
B
A
B
B
A
1
2
F
E
D
E
D
C
E C
C
F
17