Table of Contents
Advertisement
Before You Start
3 Disabling the Beeper
You can prevent the beeper from sounding when focus is achieved.
Regardless of the [z3: Beep] setting, touchscreen operation sound is
disabled during Live View shooting and movie shooting. However, when
focus is achieved with AF, the beeper (focus confirmation beep) will sound
depending on the [z3: Beep] setting.
3 Setting the Power-off Time/Auto Power Off
To save battery power, the camera turns off automatically after a set
time of idle operation elapses. The default setting is 1 min., but this
setting can be changed. If you do not want the camera to turn off
automatically, set this to [Disable]. After the power turns off, you can
turn on the camera again by pressing the shutter button or other
buttons.
Even if [Disable] is set, the LCD monitor will turn off automatically after
approx. 30 min. to save power. (The camera's power does not turn off.)
76
Select [Beep].
1
Under the [z3] tab, select [Beep],
then press <0>.
Select [Disable].
2
The beeper will not sound.
Select [Auto power off].
1
Under the [52] tab, select [Auto
power off], then press <0>.
Set the desired time.
2
Select the desired setting, then press
<0>.
Advertisement
Table of Contents
