Table of Contents
Advertisement
25
AF point selection pattern
During manual AF point selection, the selection can either stop at the
outer edge or it can cycle around to the opposite side.
With [24: Initial AF pt,
selected], the above setting will also work when you are selecting the initial
AF point for AI Servo AF.
AF point display during focus
You can set whether to display the AF point(s) when AF starts, during
AF, when focus is achieved, and while the metering timer is active after
focus is achieved.
3 Customizing AF Functions
: Stops at AF area edges
Useful if you often use an AF point
along the edge.
: Continuous
Instead of stopping at the outer edge,
the selection of AF point continues to
the opposite side.
AI Servo AF] set to [Initial
: Selected AF point
: All AF points
: Selected pt (focused,
: Selected AF pt (focused)
OFF : Disable display
AF pt
)
135
Advertisement
Table of Contents
