Table of Contents
Advertisement
Troubleshooting Guide
I have to press the shutter button twice
completely to take a picture.
Set [z3: Mirror lockup] to [Disable].
The image is out of focus or blurred.
Set the lens's focus mode switch to <AF> (p.59).
Press the shutter button gently to prevent camera shake (p.61, 62).
If the lens has an Image Stabilizer, set the IS switch to <1>.
In low light, the shutter speed may become slow. Use a faster shutter
speed (p.231), set a higher ISO speed (p.163), use flash (p.260), or
use a tripod.
See "Minimizing Blurred Photos" on page 229.
There are fewer AF points or the shape of
the Area AF frame is different.
Depending on the attached lens, the number of usable AF points and
patterns and Area AF frame's shape vary. The lenses are categorized
into 11 groups from A to K (p.102). Check which group your lens
belongs to. Using a lens in groups G to K will have fewer usable AF
points (p.105-108).
506
Advertisement
Table of Contents
