Table of Contents
Advertisement
The date/time/zone settings may be reset when the camera is stored
without the battery, when its battery becomes exhausted, or when it is
exposed to below freezing temperatures for a prolonged period. If this
happens, set the date/time/zone again.
After changing [Zone/Time difference], check that the correct date/time
are set.
When using a wired LAN or wireless file transmitter to [Sync time
between cameras], it is recommended that you use multiple EOS-1D X
Mark II cameras. If you perform [Sync time between cameras] using
different models, the time zone or time may not be set correctly.
The date/time that were set will start from when you select [OK] in step 6.
In step 3, the time displayed in [Time zone] is the time difference
compared with Coordinated Universal Time (UTC).
Even if [52: Auto power off] is set to [1 min.], [2 min.], or [4 min.], the
auto power off time will be approx. 6 min. when the [52: Date/Time/
Zone] setting screen is displayed.
Automatic time update is possible with GPS function (p.221).
3 Setting the Date, Time, and Zone
Set the daylight saving time.
5
Set it if necessary.
Turn the <5> dial to select [Y].
Press <0> so <r> is displayed.
Turn the <5> dial to select [Z],
then press <0>.
When the daylight saving time is set
to [Z], the time set in step 4 will
advance by 1 hr. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hr.
Exit the setting.
6
Turn the <5> dial to select [OK],
then press <0>.
The date/time/zone and daylight
saving time will be set and the menu
will reappear.
57
Advertisement
Table of Contents
