Table of Contents
Advertisement
3 Custom Function Settings
FE Microadjustment
Normally, this adjustment is not required. Perform this adjustment
only if necessary. Note that doing this adjustment may prevent
obtaining the correct flash exposure.
You can fine adjust the camera's standard flash exposure level. The
adjustment can help if the camera's "standard flash exposure level"
(without flash exposure compensation) always seems to underexpose
or overexpose the subject.
OFF: Disable
ON: Enable
Select [Enable], then press the <Q> button. The adjustment
screen will appear. The adjustment can be made up to ±1 stop in
1/8-stop increments. If the flash exposure level tends to
underexpose the subject, set it to the plus side. If it tends to
overexpose, set it to the minus side.
430
C.Fn3
Advertisement
Table of Contents
