Canon EOS-1 D X Mark II Instruction Manual page 107

Table of Contents

Advertisement

Group J
Autofocusing with only the 9 points shown in the diagram is possible.
Only the following AF area selection modes are selectable: Single-point
Spot AF, Single-point AF, AF point expansion (manual selection
and 9-point automatic selection AF.
If an Extender is attached (Extender compatible lenses only) and the
maximum aperture is f/8 (greater than f/5.6 but not exceeding f/8), AF
will be possible.
Even when AF point expansion (manual selection ) is set, AF point
expansion will be applied to the 9 AF points. If the manually selected AF
point does not have all four AF points on the top, bottom, left, or right, it
will expand only to those active AF points that are adjacent to it.
If the maximum aperture is slower than f/5.6 (greater than f/5.6 but not
exceeding f/8), focus may not be achieved with AF when shooting low-
contrast or low-light subjects.
If the maximum aperture is slower than f/8 (exceeding f/8), AF is not
possible during viewfinder shooting.
Lenses and Usable AF Points
: Cross-type AF point. Subject
tracking is superior and high-
precision focusing is achieved.
: AF points sensitive to horizontal
lines (AF points in line extending left
and right through center AF point) or
vertical lines (top and bottom AF
points adjacent to the center AF
point).
: Disabled AF points (not displayed).
),
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos-1d mark ii digial

Table of Contents