Table of Contents
Advertisement
Before You Start
3 Disabling the Beeper
You can prevent the beeper from sounding when focus is achieved,
during self-timer shooting, and during touch operations.
3 Setting the Power-off Time/Auto Power Off
To save battery power, the camera turns off automatically after a set
time of idle operation elapses. The default setting is 1 min., but this
setting can be changed. If you do not want the camera to turn off
automatically, set this to [Disable].
After the power turns off, you can turn on the camera again by pressing
the shutter button or other buttons.
Even if [Disable] is set, the LCD monitor will turn off automatically after
approx. 30 min. to save power. (The camera's power does not turn off.)
Select [Beep].
1
Under the [54] tab, select [Beep],
then press <0>.
Select [Disable].
2
Select [Disable], then press <0>.
The beeper will not sound.
If [Touch
will be silent only for touch
operations.
Select [Auto power off].
1
Under the [52] tab, select [Auto
power off], then press <0>.
Set the desired time.
2
Select the desired setting, then press
<0>.
] is selected, the beeper
73
Advertisement
Table of Contents
