Table of Contents
Advertisement
Troubleshooting Guide
The flash always fires at full output.
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.261).
When the flash Custom Function setting for [Flash metering mode] is
set to [TTL flash metering] (autoflash), the flash will always be fired at
full output (p.268).
Flash exposure compensation cannot be set.
If flash exposure compensation is already set with the Speedlite, flash
exposure compensation cannot be set with the camera. When the
external Speedlite's flash exposure compensation is canceled (set to
0), flash exposure compensation can be set with the camera.
High-speed sync cannot be set in the <Av> mode.
Under [z3: External Speedlite control], set [Flash sync. speed in
Av mode] to [Auto] (p.264).
The shutter makes two release sounds during Live View shooting.
If you use flash, the shutter will make two release sounds each time
you shoot (p.274).
During Live View shooting, a white <s> or red <E> icon is displayed.
It indicates that the camera's internal temperature is high. If the white
<s> icon is displayed, the still photo's image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View
shooting will soon stop automatically (p.293).
Shot images are not displayed when continuous shooting is
performed during Live View shooting.
If the image size is set to 41 or 61, the shooting images are not
displayed during continuous shooting (p.273).
510
Advertisement
Table of Contents
