Table of Contents
Advertisement
U LCD Panel Illumination
Vertical Shooting
The camera bottom has vertical-grip buttons, a dial, and a Multi-
controller (p.26, 27).
The vertical grip's Multi function button 2 and aperture button (p.26) will
work even when the Vertical-grip ON/OFF switch is set to <2>.
Displaying the Quick Control Screen
Pressing the <Q> button enables Quick Control of the shooting
function settings (p.68). Then you can press the <B> button to turn
off the screen.
You can illuminate the top and rear LCD
panels by pressing the <U> button.
Turn on (9) or off the LCD panel
illumination by pressing the <U> button.
During a bulb exposure, pressing the
shutter button completely will turn off the
LCD panel illumination.
When using the vertical-grip controls,
set the vertical-grip ON/OFF switch to
<1>.
When not using the vertical-grip
controls, set the switch to <2> to
prevent accidental operation.
After you press the <B> button a
number of times (p.478), the Quick
Control screen (p.480) or Custom Quick
Control screen (p.461) will appear. You
can then check the current shooting
function settings.
Basic Operation
67
Advertisement
Table of Contents
