Canon EOS-1 D X Mark II Instruction Manual page 56

3 Setting the Date, Time, and Zone
56
Turn the <5> dial to select [Zone],
then press <0>.
Turn the <5> dial to select the time
zone, then press <0>.
If your desired time zone is not listed,
press the <M> button, then
proceed to the next step to set it (with
the time difference from the
Coordinated Universal Time, UTC).
To set the time difference from UTC,
turn the <5> dial and select (+/-/
hour/minute) for [Time difference].
Press <0> so <r> is displayed.
Turn the <5> dial to set, then press
<0> (Returns to <s>).
After entering the time zone and time
difference, turn the <5> dial to
select [OK], then press <0>.
Set the date and time.
4
Turn the <5> dial to select an item.
Press <0> so <r> is displayed.
Turn the <5> dial to set, then press
<0> (Returns to <s>).