Canon EOS-1 D X Mark II Instruction Manual page 140

Table of Contents

Advertisement

3 Fine Adjustment of AF's Point of Focus
Adjust by Lens
You can make the adjustment for each lens and register the adjustment
in the camera. You can register the adjustment for up to 40 lenses.
When you autofocus with a lens whose adjustment is registered, the
point of focus will always be shifted by the adjustment amount.
Set the adjustment manually by repeatedly making adjustments,
shooting, and checking the results until the desired result is achieved. If
you use a zoom lens, make the adjustment for the wide-angle (W) and
telephoto (T) ends.
Registered number
140
Select [Adjust by lens].
1
Press the <B> button.
2
The [Adjust by lens] screen will
appear.
Check and change the lens
3
information.
Displaying the Lens Information
Press the <Q> button.
The screen will show the lens name
and a 10-digit serial number. When
the serial number is displayed, select
[OK] and go to step 4.
If the lens's serial number cannot be
confirmed, "0000000000" will be
displayed. In this case, enter the
number by following the instructions
on the next page.
Regarding the asterisk " * " displayed
in front of some lens serial numbers,
see the next page.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos-1d mark ii digial

Table of Contents