Table of Contents
Advertisement
During movie shooting, the red E icon is displayed.
It indicates that the camera's internal temperature is high. If the red
<E> icon is displayed, it indicates that the movie shooting will soon
stop automatically (p.341).
Movie shooting stops by itself.
If the card's writing speed is slow, movie shooting may stop
automatically. For cards that can record movies, see page 316. To find
out the card's writing speed, refer to the card manufacturer's website.
If you shoot a movie for 29 min. 59 sec. or shoot a High Frame Rate
movie for 7 min. 29 sec., the movie shooting will stop automatically.
If you shoot with H8/7J, use a CFast card [g]. Even a
high-speed CF card [f] can only record a very short movie (approx.
10 sec. max.).
The ISO speed cannot be set for movie shooting.
If the shooting mode is <d>, <s>, <f>, or <bulb>, the ISO speed
will be set automatically. In the <a> mode, you can freely set the ISO
speed (p.302).
ISO 100 cannot be set or ISO speed expansion
cannot be selected during movie shooting.
If [z2: Highlight tone priority] has been set to [Enable], the settable
ISO speed range will start from ISO 200. Even if you set [Range for
movies] for ISO speed expansion, you cannot select H, H1, or H2.
When [z2: Highlight tone priority] is set to [Disable] (p.193), ISO
100/125/160 or an expanded ISO speed can be set.
Troubleshooting Guide
511
Advertisement
Table of Contents
