Handy Features
3 Disabling the Beeper
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
3 Card Reminder
This setting prevents shooting if there is no card in the camera.
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after shooting. If [Off] is set, the image will not be displayed
immediately after shooting. If [Hold] is set, the image review will be
displayed up until the [51: Auto power off] time has elapsed.
During image review, if you operate any camera controls such as
pressing the shutter button halfway, the image review will end.
184
Under the [z1] tab, select [Beep], then
press <0>. Select [Disable], then press
<0>.
Under the [z1] tab, select [Release
shutter without card], then press <0>.
Select [Disable], then press <0>.
If there is no card inserted in the camera
and you press the shutter button, "Card"
will be displayed in the viewfinder, and
you cannot release the shutter.
Under the [z1] tab, select [Image
review], then press <0>. Select the
desired setting, then press <0>.