Heater Unit/Installation Kit; Foreword; General Instructions; Special Tools - Webasto Thermo Top E Installation Instructions Manual

Heater Unit/Installation Kit

Quantity Description
1 Nissan-specific delivery scope
1 Installation kit for Nissan Qashqai 2.0 liter Diesel
Also required:
Quantity Description
1 Heater control according to Nissan price list
Heater unit recommended for the respective vehicle class:
Vehicle
Compact car
Mid-size car, station wagon
Full-size car, van, offroader
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!

Foreword

These installation instructions apply to Nissan Qashqai 2.0 liter Diesel vehicles - for validity, see page
2 - from model year 2007 and later, assuming technical modifications to the vehicle do not affect
installation, any liability claims excluded. Depending on the vehicle version and equipment,
modifications may be necessary during installation with respect to these installation instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring
harnesses using cable ties.
Sharp edges should be fitted with edge protectors (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).

Special Tools

- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
1312732C_EN
Nissan Qashqai
Order No.:
See Nissan price list
1312667A
Order No.:
See Nissan price list
Heater unit
Thermo Top E
Thermo Top C
Thermo Top P
3