Heater Unit/Installation Kit
Quantity
Description
1
Retail accessories with desired heater control
1
Installation kit for Fiat Bravo Gasoline and Diesel
Heater unit recommended for the respective vehicle class:
Vehicle
Compact car
Mid-size car, station wagon
Full-size car, van, offroader
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!
Foreword
These installation instructions apply to Fiat Bravo Gasoline and Diesel vehicles - for validity, see page
2 - from model year 2007 and later, assuming technical modifications to the vehicle do not affect
installation, any liability claims excluded. Depending on the vehicle version and equipment,
modifications may be necessary during installation with respect to these installation instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring
harnesses using cable ties.
Sharp edges should be fitted with edge protectors (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).
Special Tools
- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Metric thread-setter kit
1312960A_EN
Fiat Bravo
Order No.:
See price list
1312956A
Heater unit
Thermo Top E
Thermo Top C
Thermo Top P
3