Coolant Connection - Webasto Thermo Top E Installation Instructions Manual

Coolant connection

WARNING!
Tighten all hose clamps to 2.0 + 0.5 Nm.
Any coolant running off should be collected using an appropriate container.
Install hoses so that they are kink-free. Unless specified otherwise, always fasten using cable ties.
Position hose clamps and spring band clamps so that no other hose can be damaged. The connection
should be "inline" based on the following diagram:
The coolant connection which differs from the standard for routing-related reasons!
All connecting pipes
All hose clamps = 20-27 mm dia.
1 = Original vehicle spring clips
1312732C_EN
= 20x20 dia..
.
Nissan Qashqai
1
D
1
A
C
B
Coolant
routing
diagram
14