Seagull Models MUSTANG P-51 Assembly Manual page 7

Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the sides
of the mount allow the servo lead to pass
through.
Using a small weight (
) and thread, feed the string through
works well
the wing as indicated.
Thread.
Thread.
Small weight.
Attach the string to the servo lead and
carefully thread it though the wing. Once you
have thread the lead throught the wing, remove
the string so it can use for the other servo
lead. Tape the servo lead to the wing to prevent
it from falling back into the wing.
Electric wire.
Thread.
www.seagullmodels.com
Weighted fuel pick-up
Small weight.
Wing bottom.
Install the aileron servo tray into the servo
mount.
Repeat the procedure for orther wing
haft.
Thread.
Small weight.
Thread.
7