Attach The Front Post - York Fitness X720 Exercises & Instruction Manual

4.
A
SENSOR
WIRE
B
FRONT
POST
C
CENTRAL
HANDLE
BAR
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
FRONT
POST
MIDDLE
WIRE
HAND
PULSE
SENSOR
CABLES
FIXING
BRACKET

ATTACH THE FRONT POST

Rest the front post on the front post
mounting tube carefully as shown.
Connect the sensor wire plug on the main
frame to the middle wire socket protruding
at the end of the front post.
Check the middle wire runs up the front
post and out of the top - later this will
connect to the computer.
NOTE: TAKE CARE to ensure the wire is
connected as tightly as possible.
Insert the front post into the front post
mounting tube and secure, using four allen
head bolts, spring washers and washers.
#5574-19 #5574-11
NOTE: TAKE CARE to ensure that the wire NOTE: TAKE CARE
does not get trapped when you attach
the front post.
Fix the central handle bar to the front post
via the fixing bracket using four allen head
bolts, spring washers and washers.
#5574-50
NOTE: TAKE CARE NOTE: TAKE CARE to ensure that the hand
pulse sensor cables do not get trapped
when you attach the centre bar.
MAKE SURE MAKE SURE you fasten the bolts
securely for your safety and comfort
when pedalling.
#5574-10
#5574-27
#5574-26
YORKX720 / 04
X4
X4
*