Sending A Flash - Motorola 9500 User Manual

r

Sending a Flash

Satellite
Mode
Cellular
Mode
(CDMA/
AMPS)
Cellular
Mode
(GSM)
62 Using In-Call Features
This feature only applies to CDMA/AMPS cellular
users.
Many CDMA/AMPS network features (for example,
Call Waiting, Call Holding, Call Forwarding) require
you to send a "flash" over the air during a call to
access them. This is similar to when you press the
switch hook on your conventional phone in your
home or office to switch between calls. The flash
alerts the network that you want to use a particular
network feature. Your service provider will provide
you with the appropriate codes to send with the
flash for the features to which you have subscribed.
To send a phone flash:
M
1. Press
Flash Options
O
2. Press
3. Enter the access code for the feature you
want to access, if necessary, and then
O
press
or
C
Press
This feature only applies to CDMA/AMPS cellular
users.
while you are in a call. You will see
followed by
. You will see Send Flash?
to send the flash.
to cancel the flash.
Select?