+
Showing Signal Strength
Use this feature to check the strength of the signal
that your phone is receiving from the Iridium satellite
network. If you are in cellular mode the signal
strength is displayed automatically if you are
registered.
1. Follow the steps in "1-2: Getting to Call
Related Features..." to get to
Strength
O
2. Press
If the antenna is not rotated, you will see
Rotate Antenna
continue.
After a few seconds, if the phone is able to
locate a signal, the signal strength indicator
appears in the upper left corner of the
display.
rx
The signal strength meter remains on the
display for several seconds. If the phone
cannot locate a signal, you will see
Signal
.
3. Press and hold
This feature is only available from satellite mode.
.
to select. You will see:
12:00
Checking
Signal ...
. Rotate the antenna to
C
to exit the menu.
Show Signal
Weak
Using Calling Features
Satellite
Mode
Cellular
Mode
111