Placing A Call On Hold - Motorola 9500 User Manual

Placing a Call on Hold

Satellite
Mode
60 Using In-Call Features
You must subscribe to this network feature through
your service provider(s).
Note: This feature behaves differently based on the
mode you are in. Check your mode settings before
using this feature. See "Selecting a Mode" on
page 169.
You can place a call on hold to receive a new call or
while making a new call. You can only place one
call on hold at a time, so some options may not be
accessible if you have already placed a call on
hold.
To place a call on hold:
M
1. Press
O
2. Press
you will see
Reconnect?
Once you a call is on hold, you have these options:
If you want to...
Make a new call
Switch Between
Calls
End Both Calls
until you will see
. Your current call is put on hold and
Call Holding
.
Then...
M
Press
1.
Make New Call
O
press
Dial the number as usual, and
2.
then press
call.
When you are connected to either
number, you will see
Switch?
followed by
O
Press to switch to the other call
and automatically place the current
call on hold.
Close the flip cover.
or
M
Press until you will see
Current & Held Call
O
then press
Both calls are disconnected, and
the display returns to standby.
Call Hold .
followed by
until you will see
, and then
to select.
O
to place the
2 Calls
.
End
, and
to select.