1-2: Getting to Phone Setup...
M
1.
Press
M
2.
Press
feature name, along with
Satellite
Mode
Cellular
Mode
(CDMA/
AMPS)
156
Customizing Phone Features
until you see
Phone Setup
to scroll to one of the features below.You will see the
r
System Scan
This feature does not apply to satellite mode. You
will not see this menu option in this mode.
The System Scan feature lets you select the type of
cellular system your phone accesses. This feature is
configured by your cellular service provider.
Select a System Scan Method
Your system ID is shown on your display when you
are registered with the system. An A indicates you
are registered with an analog system and a D
indicates you are registered with a digital system.
1. Follow the steps in "1-2: Getting to Phone
Setup..." to get to
press
2. Press
Std B/A
Only
, or
O
to select.
See the table on page 157 for a detailed
description of these settings.
3. Press and hold
, and then press
Select?
.
System Scan
O
to select.
<
to scroll to
,
Scan B/A
,
Preferred SIDs
C
to exit the menu.
O
, and then
Std A/B
,
Scan A/B,
Scan A
,
Scan B
, and then press
.
,
Home